good 1hp fountain floating water pump for irrigation and aeration

Drainage and irrigation dual-purpose floating pump or suspension pump, is directly driven by a motor installed in the gas chamber, can float on the surface and with the water level fluctuation of the movable irrigation machinery. Its characteristics and main functions are as follows

(1) Easy to use: as long as the pump into the water, will be able to start pumping power, no port, not afraid of rain water, not limited suction, particularly light weight (see table), the mobile is very convenient.

(2) Energy saving: variable water head for pressure water head, no matter what kind of specifications and models, always under the water inlet 25-50 cm, water is always in the best position, which can shorten the pipeline and there is no need to install the valve, so it can save 10-30%.

(3) Long service life: the shaft seal of floating pump is not affected by bottom sediment, without deep water pressure, it can not be trapped in silt, so the shaft seal life is longer.

(4) increase crop yield: because the floating pump suction river water is higher than the bottom water temperature, so it is conducive to the growth of rice and other crops, rice, for example, generally can be compared to the control group of early rice per mu yield increased by 5%.

The water pump has the kinetic energy and the characteristics, can be widely used in agricultural irrigation, aquaculture, breeding conditions and family life water supply, building cleaning medium, small can replace the mobile pump.

Drainage and irrigation dual-purpose floating pump is connected with the nozzle, as spray aerator, as shown in figure (1) pumping water through the hose connector (4), (5) to (6), straight from the annular spout (8) spraying increased the contact surface and the air into the air and oxygen to reach. The pipe joint (4) can be conveniently screwed out and replaced with the original water pipe, and can also be used for irrigation and drainage. When oxygen is added, the rope is fixed at the nozzle.

As for the deep water fish pond oxygen, it can be added a weight lifting in the floating pump (such as stones), the floating pump work in the middle layer vertical suspension, but not the floating pump to sink to the bottom, the distance from out of heavy rope length control; lengthened hose nozzle is still floating on the water. The purpose of this method is to improve the aeration effect, improve the low oxygen condition of bottom pool and the water quality of fishpond.

Drainage and irrigation dual-purpose floating pump for fish,shrimp, crab,shellfish and other animal use,to add oxygen in ponds.It's adding oxygen spray nozzle can increase oxygen, increase oxygen content in fishpond, improve water quality and increase production.
Floating pump is not only suitable for oxygenation of fish ponds, but also excellent in agricultural irrigation.Submersible floating pump is a good helper for agriculture and aquaculture.

Oxygen increasing principle
(1) The floating pump suspended in deep water to suction lower oxygen poor water, the spray head to form the fountain rapidly into the sky, dispersed into water droplets sizes fall back to the pond, while countless water droplets in the air expands and air contact surface, to increase the dissolved oxygen capacity.

(2) The falling water drops form a "rainstorm" area on the surface of the fish pond, and the "rainstorm" impacts the water surface, causing blisters and water waves, which makes the water pool fluctuate and plays a role of increasing oxygen again.

(3) Low temperature and high density of the lower oxygen poor water fall to the upper pond, to lower the water flow on the seal, accelerate the oxygen rich water transfer to the pond in the lower level, make full use of oxygen, natural aeration effect.

(4) When the middle and lower layers of water are sprayed into the air, the harmful gases will naturally escape into the atmosphere and improve the water quality of the fishpond.

 [summary] water pump can float on the water, with the water level fluctuation, has the advantages of convenient, energy saving, maintenance free, it completely changed the submersible pump for bottom sediment silt, affect the life of the shortcomings, is a new generation of mobile irrigation machinery.

Usage method
(1) the use of power supply voltage must be consistent with the provisions of the floating voltage pump model. The use of single-phase power supply is connected with the three wire cable; use three-phase power supply, connected with the four wire cable, cable end (PE) logo is ground to reliable grounding.

(2) All the soft water pipe connected with water outlet pipe and random, its interface with hose clamps or wire hoop, then tighten the nut on the pump casing pipe into the water can be pumped.

(3) If there is no water or little water after power is opened, it is because the motor is reversed, the position of any two lines in the three-phase power supply should be replaced so that the motor is turning.

(4) The power supply should be connected with fuse, when working within a radius of two meters to allow no one to enter, moving pumps should first cut off the power ,refuel the cylinder once every six months.

Packing:Motors are packed in plywood cases or carton,floatings are packed in bag or in nude.
Shipping:All goods can be shipped by sea,land,train,plane. And we accept FCL or bulk shipment.